Introduction: Agilent Technologies has announced the launch of a series of high-brightness white surface-mount LEDs using the PLCC-2 (Plastic Leaded Chip Carrier) and Power PLCC-4 industry standards - HSMW-A10xx and HSMW -A40xx series. These white LEDs can easily replace TopLED and Power TopLED products used in automotive interior lighting applications.
The Agilent HSMW-A10xx and HSMW-A40xx series of white surface mount (SMT) LEDs feature an ultra-wide viewing angle of 120 degrees, making them ideal for applications such as dashboards, buttons or general backlights in automotive interiors. The light-emitting surface on the top of these LEDs is flat and can be easily plugged into the light trough; its built-in reflector increases the intensity of the light output, especially for vanity mirror lights, cab lights, ceiling lights and door handle lights. Brightness applications in automotive environments. These LEDs can also be used in office equipment and industrial equipment and appliance dashboards, push buttons or general backlights, variable signal signs, and indoor and outdoor lighting for commercial and residential applications.
In the PLCC-2 package, the Agilent HSMW-A101-R50J1 achieves a minimum luminous intensity (Iv) of 100 mcd (candle light); the HSMW-A100-T50J1 achieves a minimum Iv of 250mcd. The Iv metrics for both products were measured at a forward current of 20 mA. In the Power PLCC-4 package, the HSMW-A400-U00M2 has a minimum Iv of 400mcd at a forward current of 30mA.
Agilent's HSMW-A10xx and HSMW-A40xx series of LEDs are available in a rugged package with high optical efficiency and operating temperatures from -40°C to +100°C to ensure high reliability in harsh driving environments. . For easy pick and place assembly, these LEDs are packaged on EIA-compliant tapes and reels. The products carried on each reel are specifically chosen to ensure uniform brightness and color. These LEDs use the same reflow soldering and wave soldering processes as IR (infrared).
The Agilent HSMW-A10xx and HSMW-A40xx series of white surface mount (SMT) LEDs feature an ultra-wide viewing angle of 120 degrees, making them ideal for applications such as dashboards, buttons or general backlights in automotive interiors. The light-emitting surface on the top of these LEDs is flat and can be easily plugged into the light trough; its built-in reflector increases the intensity of the light output, especially for vanity mirror lights, cab lights, ceiling lights and door handle lights. Brightness applications in automotive environments. These LEDs can also be used in office equipment and industrial equipment and appliance dashboards, push buttons or general backlights, variable signal signs, and indoor and outdoor lighting for commercial and residential applications.
In the PLCC-2 package, the Agilent HSMW-A101-R50J1 achieves a minimum luminous intensity (Iv) of 100 mcd (candle light); the HSMW-A100-T50J1 achieves a minimum Iv of 250mcd. The Iv metrics for both products were measured at a forward current of 20 mA. In the Power PLCC-4 package, the HSMW-A400-U00M2 has a minimum Iv of 400mcd at a forward current of 30mA.
Agilent's HSMW-A10xx and HSMW-A40xx series of LEDs are available in a rugged package with high optical efficiency and operating temperatures from -40°C to +100°C to ensure high reliability in harsh driving environments. . For easy pick and place assembly, these LEDs are packaged on EIA-compliant tapes and reels. The products carried on each reel are specifically chosen to ensure uniform brightness and color. These LEDs use the same reflow soldering and wave soldering processes as IR (infrared).
Standard Cable Ties Co., Ltd. , http://www.nscableties.com