Entrusted by Maoming Branch of China Petroleum & Chemical Corporation, the Maoming Branch made an open tender for the cracking convection section modules J161012005 and J161012007 cracking convection section modules and flue ducts for infrastructure construction, inspection and maintenance of Maoming Branch. This announcement is issued today. Qualified bidders are invited to register.
1. Bidding number: WZ20170117-4801-871-B1
2. Project Content: Cracking convection section module for infrastructure, inspection and maintenance of Maoming Branch
Project Overview: The project has passed the approval and the funds have been implemented.
3. Name and quantity of tender materials:
No. Quantity Unit of measure
1 radiation section coil H-112 25Cr35NiNbMA 1.0 sets
2 radiation section coil H-113 25Cr35NiNbMA 1.0 sets
4. Delivery date and place: December 30, 2018, Maoming Petrochemical construction and installation site
5. Bidder's basic qualification requirements:
5.1 Have the right to independently conclude the contract and the ability to perform the contract, obtain a business license in accordance with the law, business license is in its valid period, business license, tax registration certificate, organization code certificate is complete legal person or other organization with complete three certificates.
5.2. For VAT general taxpayers, there were no illegal records in other procurement activities attended in the past three years.
5.3 With the required material supply capacity and quality control measures, no significant quality problems have occurred during the use of the products provided in the past three years.
5.4 has a good business reputation, a sound financial accounting system, financial status and market behavior is good. It is not under the authority of the competent authority to revoke the business license, revoke the qualifications, suspend business for rectification, cancel the qualifications for the bid, and the property is taken over, frozen, or enter bankruptcy procedures.
5.5 There is no state in which Sinopec Corp. has been suspended from trading due to breach of contract or other reasons.
6. Other major qualification requirements:
6.1 comply with other conditions stipulated by laws and regulations.
6.2 This tender accepts the application from the manufacturer (manufacturer) and does not accept the bids from agents or distributors. It does not accept the consortium bid.
6.3 The bidder shall own the entity manufacturing plant of the cracking furnace steel structure and the convection section coil pipe, and provide the supporting documents (including the detailed address); The cracking furnace steel structure and the convection section coil pipe of the project shall be in the bidder’s own entity. Manufacturers manufacture.
6.4 Bidders shall have Class A boiler or Class A waste heat boiler qualification.
6.5 performance requirements to be satisfied at the same time: 1, the bidder should have a single ethylene cracker convection section module (including coil, steel structure, lining, elbow box) weight of not less than 11 tons, length × width × height is not less than 11200 × × 2000×2700mm, manufacturing performance is not less than 3 items; 2. The bidder must provide a copy of the contract to prove it meets the requirements. The copy of the contract shall include at least: project name, equipment name, single stove production capacity, module weight, size, and Signed seal pages, etc., copies of the contract are not clear or do not provide invalid results; 3 performance period: the signing date of the contract from September 7, 2011 to September 7, 2016 (nearly five years).
6.6 The bidder's equipment capabilities must meet the requirements of Article 3.7 of the Technical Bidding Document (3.7.1 area of ​​the manufacturing plant is not less than 10,000 square meters, the weight of a single lift of 3.7.2 tonnage crane should be greater than 100 tons; and 3.7.3 is used for plasma cutting of this project. At least one machine, no less than 24 channels of spectrum analyzer at least one; 3.7.4 has a sandblasting special workshop).
7. Comply with other conditions stipulated by laws and regulations.
8. Detailed requirements are detailed in the bidding documents.
9. This tender accepts the application from the manufacturer (manufacturer), does not accept the agent's bid, and does not accept the distributor's bid.
10. The tender does not accept the consortium bid.
11. Evaluation method: Comprehensive evaluation method.
12. The cost of bidding documents: The bidding documents cost 1,000 yuan, which is purchased online and the tender documents are not refundable after sale.
13. Bidding documents Sale time: From 10:00 on December 30, 2016 to 17:30 on January 4, 2017 (Beijing time, the same below).
We can follow customers' drawings or design to make Customized wire harness for various industries: game machine, ATM, POS machine, etc.
Customized wire assembly with AVL components from original manufactures. Also harness with local equivalent componets are workable with short L/T and competitive price, also flexible MOQ.
Related Products:cigarrete charging cable,custom audio cables,fiber optic cable,cigarrete lighter cable.
Cigarrete Lighter Cable,Custom Audio Cables,Fiber Optic Cable,High Quality Electrical Wire Harness,Automotive Wiring Harness,Coiled Cable,Wiring Assemblies,Fuse Holder,Auto Plug Cable,Cigarrete Charging Cable
ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com