Implementation specification for quality supervision and spot check of self-ballasted fluorescent lamps for general lighting (table)

1 Scope of application

This code is applicable to the quality supervision and spot check of self-ballasted fluorescent lamps for general lighting organized by national and provincial quality and technical supervision departments. The supervision and spot checks organized by other quality and technical supervision departments and for special situations can be implemented with reference to this specification. The contents of this specification include product classification, enterprise size division, inspection basis, sampling, inspection requirements, judgment principle and objection processing re-examination.

This specification applies to self-ballasted fluorescent lamps for general lighting. The scope of application is as follows:

Rated power 60W and below;

Rated voltage 100-250V

Edison screw cap or bayonet cap.

2 Product Categories

2.1 Product Classification and Code


2.2 Product Category

The self-ballasted fluorescent lamp for general lighting is referred to as self-ballasted lamp, commonly known as energy-saving lamp. It refers to a fluorescent lamp that contains a lamp holder, a ballast and a lamp tube, and is integrated into it. This lamp is non-removable without damaging its structure. .

According to the type of lamp head, it can be divided into self-ballasted fluorescent lamp with screw-type lamp cap and self-ballasted fluorescent lamp with bayonet lamp cap. According to ballast type, it can be divided into self-ballasted fluorescent lamp with electronic ballast and inductor. Self-ballasted fluorescent lamps for ballasts.

3 Enterprise size division

According to the actual situation of the self-ballasted fluorescent lamp industry for general lighting, the scale of the production enterprise is divided into large, medium and small enterprises based on the annual sales of self-ballasted fluorescent lamps for general lighting. See the table below:


4 Inspection basis

All subsequent amendments or revisions to the following documents are not applicable to this specification. For undated dates, the latest edition applies to this specification.

GB16844 "Safety requirements for self-ballasted fluorescent lamps for general lighting"

GB17625.1 "Electromagnetic compatibility limit, harmonic current emission limit (device input current per phase ≤ 16A)"

GB19044 "Energy efficiency limit value and energy efficiency rating of self-ballasted fluorescent lamps for general lighting"

GB/T17263 "Performance requirements for self-ballasted fluorescent lamps for general lighting"

The State Administration of Quality Supervision, Inspection and Quarantine, No. 13

Recorded current effective corporate standards and product quality requirements

5 sampling

5.1 Sampling model or specification

Each company draws a representative sample.

5.2 Sampling methods, cardinality and quantity

Products that have passed the inspection of the enterprise or have been qualified in any way are randomly selected in the finished product warehouse of the enterprise or in the market. When sampling the enterprise finished product library, the sampling base is not less than 200, and a total of 25 samples are taken, of which 15 are used as test samples and 10 are used as spare samples to be sealed in the inspection unit. When sampling in the market, the sampling base can satisfy the sampling quantity, and the extraction method and quantity requirements are the same as those in the enterprise finished product sampling.

5.3 Sample Disposal

The sample taken is packaged according to the transportation conditions, and the “Product Quality Supervision and Inspection Seal List” is attached to all possible openings on the package. The sample to be taken should not be stressed, damp, rain, exposed to the sun during transportation and storage, or placed together with oil and acid, alkali and other corrosive substances.

5.4 Sample list

The sample list should be filled in accordance with relevant regulations, and the products to be inspected and the relevant information of the enterprise should be recorded. At the same time, the total sales of self-ballasted fluorescent lamps for general lighting produced by the company in the previous year were recorded in 10,000 yuan. If the sampled company did not produce such products in the previous year, record the total sales of such products actually produced during the year.


1 2 3 Next Page

There are many kinds of Electric Accessories,with different of functions,and our company's Electric Accessories are mainly composed of these series:

Nylon Cable Ties
Cable Clips
Expand Nail
Cable Marker
Self-Adhesive Cable Tie Base
Spiral Wrapping Band
Self-screw End Wire Connector
Double Wings End Wire Connector
PG Cable Gland
PGM Metallic Cable Gland
Wiring Duct(Slotted)
PZC Wiring Duct

Electric Accessories

Cable Clips,Cable Ties,Cable Marker,Spiral Wrapping Band

Ningbo Bond Industrial Electric Co., Ltd. , http://www.bondelectro.com